Our products

OPTI-PAN – Retention tray for flat roof

The OPTI-PAN is designed for flat roofs to recover water that could come down into the roof. Sometimes there may be traces of moisture. Although the Optimum vent is designed to remedy this situation when the climate is very humid, a few droplets of water can remain on the walls of the vent to descend back to the roof. Placed on the mineral wool under the vent, the Optimum tray recovers this water by evaporating normally afterwards. The OPTI-PAN is highly recommended and is the solution for a dry pit at all times.

Would you buy this product?

FIND A RETAILER

Advantages

  • Easy to install
  • Designed to deny infiltration
  • Made of plastic
  • Also available for sloped and custom roofs

Documentation

Use

Use

Fold the tray in half diagonally to form a triangle. Slide the tray into the attic through the opening for the vent. Once inside, place it on the mineral wool centered with the vent opening. For sloping roofs, those are made of metal. They are specially designed for each vent model with a proper anchoring.

Specifications

PRODUCT DIMENSIONS CHARACTERISTIC
LENGTH WIDTH HEIGHT
OPTI-PAN 60,9 cm • 24” 60,9 cm • 24” 7,6 cm • 3” Plastic flexible

Option

Other sizes available on request

Colour

Transparent

Warranty

Optimum vents have a limited lifetime warranty against any manufacturing defects that may affect the unit. We can offer this peace of mind to all our customers because all our products are CSA approved. We apply also those same criterias of quality on all custom models. This means that during the time when the owner of the house who installed or had installed the Optimum vent remains at the address of the installation, Ventilation Optimum replace it free for the first five years and thereafter, in proportion to the years of use, against any defect. In such a case, the cost of transportation and installation will be at the customer charge as well as any home repairs. The warranty applies in all cases where the Optimum vent has been installed according to our recommendations and has been free from any abuse, misuse or other circumstances beyond the control of Ventilation Optimum including salty air.
Warranty regarding painting:
The Optimum Roof Ventilator is made of 24 and 26 gauge galvanized steel and is coated with a powder or liquid baked polyester based paint. Optimum Ventilation is proud to offer you a 5 year warranty against corrosion. During this period, Ventilation Optimum will replace the product at the counter upon presentation of the original proof of purchase.
Conditions:
The responsibility of Ventilation Optimum is limited only to the replacement of parts in the workshop. All expenses related to time, travel and home repairs are not covered by this warranty.
Corrosion that does not result from a defect in material or workmanship is not covered by this warranty. Circumstances beyond the control of Ventilation Optimum such as: corrosion caused by industrial fallout, acid rain, accidents, damage, negligence, modification of the product as well as that resulting from improper installation damaging steel, paint scratched by handling, installation or negligence, by an acid environment such as swine farms etc … are excluded from this warranty.
This warranty also excludes damage caused by:
– Infiltration of water due to an improper installation that does not comply with the recommendations and instructions of the manufacturer,
– The infiltration of water and / or condensation due to a building deficiency at the level of the national building code.
– Failure of roof drainage.
– The accumulation of snow covering the vent
– Any domestic paint applications or inappropriate cleaning solutions.
– Bad weather and natural disasters
– Transportation, handling or storage
Tightness of the roof or parts installed by the contractor are not guaranteed as they are out of the control of the manufacturer. It is the roofer’s responsibility to ensure that the base is properly waterproofed using the proper roofing products. The Association of Master Roofers (AMCQ) recommends using the following technique: Metal flanges: The metal flanges of all projections must be coated with a primer embedded in plastic roofing cement, covered with a fold of cotton saturated with asphalt or canvas, followed by a fold of 15-pound felt and another fold of cotton saturated with asphalt or canvas embedded in a bitumen. In addition, having no precise notion of the composition of the building such as the tightness of the vapor barrier, the insulation or the exact amount of air inlets; these elements do not allow us to give a guarantee on the final result. Proof of purchase showing the date, your name and the shipping address will be essential in order to make any warranty claim.